Previous Model

FAQ

VIDEO MODE

 

PHOTO MODE

 

PLAYBACK MODE

 

POWER

The dash cam battery will hold a minimal amount of charge. You MUST keep the dash cam plugged into a power source for continuous use.

 

TURNING OFF MOTION SENSOR

1. Press the POWER button located on the left side of the unit, top button.
2. Eject the memory card, which will stop the recording and allow access to the MENU.
3. Press the MENU button located on the left side of the unit, bottom one.
4. Use the down arrow button to navigate to Motion Detection. Press OK to uncheck it.
5. Continue scrolling down to Parking Wake. Press OK to uncheck it.
6. Press the MENU button to fully exit.
7. Insert the SD card back into the slot.

 

DAY AND NIGHT TIME MODE/INFRARED LIGHT

1. There is no automatic setting for the infrared light and must be manually changed from day to night or vice versa.
2. Press the POWER button located on the left side of the unit, top button.
3. Tap the POWER button to enable the infrared light. A lightning bolt icon will appear on the screen. Do this for night time mode.
4. For day time mode, tap the POWER button after powering on. The lightning bolt icon will have a slash through it.

 

TRANSFERRING FILES TO YOUR COMPUTER

1. Use the USB charge/sync cable to connect the camera to your computer.
2. A pop-up screen on your camera will show MEMORY or VIDEO
3. Selecting MEMORY will allow you to view and/or transfer the files to your computer. Camera buttons will not be functional.
4. Selecting VIDEO allows the camera buttons to be functional while connected to the computer.
5. Disconnect from the computer after data has been transferred.