POWER

- The dash cam battery will only hold a minimal amount of charge. You MUST keep the dash cam plugged in to a power source for continuous use

 

LCD TIMEOUT – IF YOUR SCREEN TURNS OFF

1. Even with the screen off, the unit is continually recording as long as the blue light (by left-hand side buttons) is flashing.
2. Press OK to turn the screen back on.
3. Press OK again to turn off the recording feature. Flashing red dot should disappear.
4. Press MENU twice. Should show the wrench icon.
5. Using the arrow down button, scroll down to LCD Off and press OK.
6. Should see OFF, 1 Min., 2 Min., and 3 Min. options.
7. Use the arrow up button to go to OFF and press OK.
8. Press MENU to return to the main screen.
9. Press OK to begin recording. Red dot should be flashing next to the dash cam icon.

 

INFRARED LIGHT

1. Press the Power button.
2. Press it again to manually change the infrared setting. You should see a switch from the sun to the moon/star icons or vice versa.
3. To set it automatically, press OK to turn off the recording feature.
4. Press MENU twice. The wrench icon should be highlighted.
5. Using the arrow buttons, scroll down to LED and press OK.
6. Scroll down again to set to AUTO and press OK.
7. Press MENU to return to the main screen.
8. Press OK to begin recording. Red dot should be flashing next to the dash cam icon.

 

TRANSFERRING FILES TO YOUR COMPUTER

1. Use the USB cable to connect the dash cam to the computer.
2. Dash cam screen should be blue say DISK DRIVE.
3. In your computer, find the drive with DCIM folder.
4. Open the DCIM folder to view recordings (MOVI) and pictures (PICT) saved on the dash cam.
5. Play, save and/or delete as needed.